                                                                      
                                                                      
HP OMNIBOOK 5700CT NOTEBOOK PC - MS WINDOWS 95, INSTALLING VIDEO
DRIVERS


INTRODUCTION
     
     The HP OmniBook 5700 Notebook PC includes Microsoft (R) Windows 95
     as one choice for the preloaded and preconfigured operating system. 
     If you install a retail Windows 95, follow these instructions to
     upgrade to the latest HP OmniBook PC video drivers.
          
          NOTE:     Microsoft Windows 95 comes with built in
                    video support for the Chips &
                    Technologies video controller used in
                    the HP OmniBook 5700 Notebook PC.
                    However, the Microsoft driver is not
                    very clear at high resolutions on an
                    external display. Use this information
                    to install the updated video driver.
     

REQUIREMENTS
     
     *    HP OmniBook 5700 Notebook PC with Microsoft Windows 95
          installed. 
     
     *    HP OmniBook 5700 Notebook PC video drivers.  You can obtain the
          drivers from the hard disk in the C:\OMNIBOOK\DRIVERS\WIN95\VIDEO
          directory or from the HP OmniBook 5700 Notebook PC Recovery CD 
          in the \OMNIBOOK\DRIVERS\WIN95\VIDEO directory. 
     

PROCEDURE
     
     1.   Open Control Panel and double-click Display (or right-click
          the desktop and choose Properties).
     
     2.   On the Settings tab, click Change Display Type (or Advanced 
          Properties).
     
     3.   Under Adapter Type, click Change.
     
     4.   Click Have Disk.
     
     5.   Type the path for the video driver files (such as A:\ for a
          "Video Drivers" floppy disk, or
          C:\OMNIBOOK\DRIVERS\WIN95\VIDEO for the hard disk), then
          click OK.
     
     6.   Select CHIPS95.INF and click OK.
     
     7.   Click OK to install "Chips & Tech. 65554 PCI." 
     
     8.   Click Close.
     
     9.   Click Close to exit Display Properties.
     
     10.  When prompted, click Yes to restart the HP OmniBook PC.

______________________________________________________________________
            Microsoft (R) is a U.S. registered trademark of
                            Microsoft Corp.
                                   
               Windows (R) and MS Windows (R) are U. S.
               registered trademarks of Microsoft Corp.
                                   
                  Copyright  Hewlett-Packard Co. 1996
       This information is subject to change without notice and
                 is provided "as is" with no warranty.
          Hewlett-Packard shall not be liable for any direct,
        indirect, special, incidental or consequential damages
             in connection with the use of this material.
