Hotkeys:

  To access hotkeys, press ALT and the underlined 
  character to select that choice.

Copy driver to  -

  This option copies the JetEye driver, IRJETEYE.SYS to
  the specified directory.  The default is:      C:\

  If you do not select this option, Install will not copy 
  the JetEye driver onto your PC.  You will need to copy
  the JetEye driver yourself.  You must have the JetEye
  driver on your PC  before you can print over infrared.

  To store the JetEye driver in another directory, enter the 
  full path name of the directory you wish to use in the edit 
  box.  The directory you name must already exist.  For example 
  if you had created a directory called JETEYE you would enter: 
     C:\JETEYE\

Modify CONFIG.SYS file -

  Your original CONFIG.SYS will be saved as CONFIG.BAK.  The 
  install program adds the JetEye driver name to the devices 
  listed in your CONFIG.SYS file.  It adds the following line to 
  the end of your CONFIG.SYS file:
     DEVICE=[path name]IRJETEYE.SYS [ir port]

  Where [path name] is the directory where the JetEye driver is 
  located and [ir port] identifies the infrared port: COM1, COM2,
  COM3 or COM4.
  For example:
     DEVICE=C:\IRJETEYE.SYS COM2
  should be used on a PC where the infrared device is attached
  to COM2.

  If you do not select this option, you will need to add the 
  device line to your CONFIG.SYS file yourself.  This line must 
  be present in order to activate the JetEye driver when you 
  reboot your PC.

Modify WIN.INI file -

  Your original CONFIG.SYS will be saved as CONFIG.BAK.  
  The install program will insure the "Fast Print to Port" 
  option is not selected in your printer configuration.

  If you do not select this option, you should verify the 
  state of the "Fast Print to Port"  check box before doing 
  any infrared printing.   Open the Control Panel.  Double 
  click on the Printer icon.  Choose Connect.  The 
  "Fast Print to Port" check box is in the lower left corner 
  of the Connect dialog box.  Verify the check box is not 
  selected.

Copy driver utility to -

  This option copies the JetEye utility JETUTIL.EXE  to the 
  specified directory.  The default is:   C:\

  If you wish to conserve storage space on your PC, do NOT
  select this option.  The utility file is about 8K.  The
  JetEye utility can be used enable and disable the driver and 
  check the current status of the driver.  The JetEye utility is
  optional,  it is necessary to disable the JetEye driver only
  when the COM port is not to be used as an infrared port.

  To store the JetEye utility in another directory, enter the 
  full path name of the directory you wish to use in the edit 
  box. The directory you name must already exist.  For example, 
  if you had created a directory called JETEYE you would enter: 
      C:\JETEYE\


       Extended Systems Technical Support is available 
           from 7 a.m. to 6 p.m. (Mountain Time), 
         Monday through Friday excluding holidays.

           (800) 235-7576         (208) 322-7575    

                   fax: (208) 377-1906

         24 hour BBS: (208) 327-5020   14.4K,n,8,1

          Internet Email:  support@extendsys.com
 
 
