
     This disk's root directory has three subdirectories, "i386",
     "mips", and "alpha, for the Intel (i386), Mips, and Alpha
     versions of Windows NT. Each contains device driver files
     for the correspondent version of Windows NT.

     Use Windows NT Setup to install these device drivers:

          1) Double click on the "Windows NT Setup" icon in the
             "Main" program group.

          2) Select "Add/Remove Tape Devices..." in the "Options"
             menu of Windows NT Setup.

          3) Select "Add.." in the "Tape Device Setup" window.

          4) Open/expand the "Device:" list in the "Select Tape
             Device Option" window.

          5) Select "Other (Requires a disk from a hardware
             manufacturer)" at the bottom of the "Device:" list
             in the "Select Tape Device Option" window.

          6) Enter the drive/path to the appropriate files on
             this disk in the "Insert Diskette" window; e.g.,
             "a:\i386" for the files for the Intel (i386)
             version of Windows NT, "a:\mips" for the files
             for the Mips version of Windows NT, and "a:\alpha"
             for the files for the Alpha version of Windows NT.

          7) Select "OK" in the "Insert Diskette" window.

          8) Select one of the lines in the "Choose a Tape Driver
             supported by this hardware manufacturer's disk." list
             in the "Select OEM Option" window; i.e., select the
             description of the set of tape drives that you want
             a device driver for.

          9) Select "OK" in the "Select OEM Option" window.

         10) Select "Install" in the "Select Tape Device Option"
             window.

         11) If it appears, then select "New" in the "Windows NT
             Setup" window; otherwise, enter the same drive/path
             to the appropriate files on this disk that was used
             in step #6 above.

         12) Select "Continue" in the "Windows NT Setup" window.

         The "Tape Device Setup" window will reappear with the
         line item selected in step #8 now included in the "Tape
         Devices installed on ..." list. Close the "Tape Device
         Setup" window, close/exit Windows NT Setup, and restart
         Windows NT to activate the changes made.
