     ******** Install Windows NT Driver  ********

     This driver is for Windows NT 3.1 and Windows NT 3.5. The driver
     is provided on diskette of your
     DC-200/DC-4030VL/DC-4030VL-1/DC-4030VL-2/DC400/DC-5030 package. Please
     follow the steps below to install the Windows NT driver:

     (This driver not support ATAPI, so you can not use this driver to read/
      write IDE CDROM)

Promise Technology Inc. IDE Cache Adapter Driver Installation
--------------------------------------------

1) From the Program Manager, double click on "Windows NT Setup" in the
   Main group.

2) Select "Options/Add/Remove SCSI Adapters..."

3) Click on "Add" then warning dialog will appear and click "OK".

4) The "Select SCSI Adapter Option" dialog will appear; select
   "Other (Requires a disk from a hardware manufacturer)" from the
   "Adapter:" list box.

5) Next, the "Insert Diskette" dialogbox will appear; insert the Promise
   driver disk into Drive A: and type "A:\NT" into dialogbox.

6) Next, the "Select OEM Option" dialogbox will appear; select
   "Promise Technology Inc. IDE Cache Adapter" and click "OK".

7) Next the "Select SCSI Adapter Option" dialogbox will appear; click on
   the "Install" button in the dialogbox.

8) If installation is successful, the "SCSI Adapter Setup" dialogbox will
   reappear, and "Promise Technology Inc. IDE Cache Adapter" will be listed
   as an installed driver.
   P.S.: In NT 3.5, ATAPI driver's user will not found CDROM if used this
         driver. If you want to use CDROM again please remove this driver.

9) Reboot your system to load the Promise Cache IDE driver.
