Teac CD-55A (Quad Speed CD-ROM Drives - PANASONIC interface)
============================================================

----------------------------------------------------------------------

<Base I/O Addr>
    The base I/O address option allows user to enter any of the following
    addresses.
        Available Addresses are:
        SB compatible --> 220,240,260,280
        PANASONIC compatible --> 300,310,320,330
        (All address are in hexadecimal form.)
<Drive Letter>
    This allows user to define the drive letter to be installed on the
    CD-ROM drive.
<Device Name>
    A string of up to a maximum of 8 characters is allowed in this option.
<Drive Speed>
    The default option (Double Speed) is changeable to single speed by user.

<Verbose>
    This option if turned on will display the drive installation configuration
    at boot-up time.
-----------------------------------------------------------------------

Parameters Use

/D:<xxxxxxxx>  define the device name for the CD-ROM installed on the system.
               This name has to be identical to that MSCDEX.EXE line defined
               in 'auctoexe.bat' file.
/P:<xxx>       320 will define the port address to be installed on the CD-ROM
               drive to 320 hex. Other available port address is described in
               the <Base I/O Addr> option.
/T             define the interface board. 0 for Sound Blaster, 1 for TEAC
               interface, 2 for Sound Blaster Compatible, 3 for Panasonic
               interface.
/C:<xxxx>      defines the number of cache sectors of the CD-ROM drive. (Up to
               four digits can be input.) Default setting is "no caching".
/S:<x>         defines x-times fixed speed mode. Only 4,2, and 1 can ne entered
               for x.
               The default setting is the auto mode(normally quadruple speed;
               vaires depending on conditions).
/I:<x>         Specifies the power save time. <x>=H,M or L. High(H), Medium(M),
               or Low(L).
