Panasonic CDR-562 CD-ROM Driver (Panasonic Interface)
=====================================================

/d:xxxxxxxx   Define the device name for the CD-ROM installed on the
              system. This name has to be identical to that defined in
              the line installing the MSCDEX.EXE program in the
              'autoexec.bat' file.

/p:xxx        Define the port address to be installed on the CD-ROM drive.
              Supported Address are 300,310,320,330,340 Hex.

/s:(mode)(ID) Define the speed control mode for the drive. For (mode)
              setting,
                            A: Auto mode speed
                            N: Normal mode speed
                            D: Double mode speed
              If (ID) is set after (mode) setting, (mode) is effective
              only for the drive appointed with ID No. If (ID) is ommited,
              (mode) is effective for all connected drive.
              If /s:switch is omitted, all connected drives shall become
              double mode speed.

/n:(ID)       Define the number of drives connected daisy chained.
              Default is /n:4

/x            usable for application to require the support of lock/unlock
              door and eject.

/a            sound always output to both channel even if application output
              sound from one channel.

