The rockets for the P-38 was posted by one of the
HexPerts,Keith Heitman I think,earlier- here it is:
 Debug P38H.SPC
E 1E6 03
E 258 03 0A 82 00 02 00 E8 03 64 00 01 00 64 00 2C 01
W
Q
You can substitute P38J.SPC.
 

FROM:    TOM PHILO   (JHDD99A)
SUBJECT: SWOTL GROUP

Debug address 258 is correct for rockets on the outer rack
for both P38s.
DEBUG P38J.SPC or DEBUG P38H.SPC <ENTER>
E 258 03 0A 82 00 02 00 E8 03 64 00 01 00 64 00 2D C1<ENTER>
W <ENTER>
Q <ENTER>
originally posted by     Keith Heitmann, GVXV90A


TO:      RICHARD MUTH   (FFTV31C)
FROM:    GREGORY SMITH   (GFBS14A)
SUBJECT: SWOTL GROUP

I'm a little mystified, since Keith posted the original P-38
rocket add-on.  I guess I must have reposted it without
crediting him.  Normally that's bad manners, but everyone
knows he taught me everything anyway<G>.  But the bottom
line:  rockets are just like bullets, in that the "e8 03" is
their muzzle velocity/range factor.  So, if you know of a
rocket that has a higher muzzle velocity, just hex it in.
Obviously, my Fritz X and X-4 missiles (with a velocity of
60 09) are at the other end of the spectrum.  I have tried
to go higher than 60 09 but weird things happen.  So
basically, just try different values in there.  A good one
might be 78 05 or b1 06.

 08/02 23:27  --Sturmer                 /Greg Smith gfbs14a


Greg Fly Boy Smith?  I like it!


 
