  MS-DOS Version 6.2 Step Up

*** Requires High Density Disk ***

This upgrades MS-DOS on from version 6 to version 6.2.

This disk contains the following files--

   README.NOW     1MSDOS62.EXE
   SETUP.BAT      2MSDOS62.EXE
   README.TXT

In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure your printer is switched on, is on line,
and at the C:\> prompt, type the following command--

   PRINT A:README.TXT

and press <Enter>.

The installation instructions for these drivers are included in the
README.NOW file on this diskette. In order to print the README.NOW
file, insert this upgrade disk in Drive A. At the C:\> prompt,
type in the following--

   PRINT A:README.NOW

and press <Enter>. The README.NOW file is approximately 9 pages long.

NOTE:

* The installation instructions for the MS-DOS 6.2 Upgrade are on
     the second page of the README.NOW printout. Installation of this
     upgrade without using SETUP.BAT (the batch file which prepares
     your system to run MS-DOS 6.2 Setup) is described on the fourth
     page of this printout.


NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."
