Tandy Professional Forum   Section: MS-DOS Applications
Subject: Driver for DMP136 Tandy?   Total messages: 3
=====================================================

#62780   2 Replies   01/08/97   23:10:23
From: Kevin McKay, 70732,1047
To:   All

I have a Tandy DMP 136.  It is a few years old, but works very
well.   I would like to be able to use it with Windows 95 and
perhaps with 3.11 as well.  Is there a printer driver available
for this printer or is there another printer that it is
compatible with that is included with the Windows 95 program?

Thanks,
Kevin


#62782   Reply to #62780   01/09/97   13:12:29
From: Robert A. Hengstebeck, 76417,2751
To:   Kevin McKay, 70732,1047

We have a DMP-136 also.  Haven't tried to run it with windows
yet, but in a number of applications, we have found the epson
drivers to work adequately.  Do you still have your owner's
manual? If you do, look up the emulations the printer will
support, and try the windows drivers for that emulation.


#62783   Reply to #62780   01/09/97   19:32:05
From: Russell C. Padden, 102616,1126
To:   Kevin McKay, 70732,1047

Try Epson FX 80 or FX 86e.  They work with dos programs and
should work with both Windoze versions.


