                          [ TUNE ]

Tune is a program found from a Japanese Web Site and a FTP Site.
Written by "Ringoro" and Copyright 1994.
Since it is from Japan, the readme files and instructions are in
Japanese, so here is an idea on how to use it in English.  This
is NOT a translation of what is included with the program.

F2 = Tuner
F3 = Metronome
F4 = Scale
F9 = Quit


                      [ SCREEN LAYOUT ]

Left Block is a TUNER with the default setting of 440 in a small
box.  Below that is a dial with key signatures.  Mid-Top of the
screen is a setting for TEMPO.  (Default is 120)  Below that is
a larger windows is a music staff that displays SCALES.  (A 
Ionian C scale is default)


                        [ TUNER - F2 ]

The right and left arrow keys move the pointer on the dial around 
to point at each key.  The SPACE BAR or ENTER will start a tone for 
tuning to, press the SPACE BAR or ENTER again to stop the tone.  
Next to 440 is, by default, a M.  The up and down arrows will 
change that M to a H or a L.  This is to change the tone from 
Medium to High and Low.  TAB will allow you to cycle from 440 to 
442, 443, 444, 445, 415, 438 and 439 for adjustment in tunings 
off of 440.


                      [ METRONOME - F3 ]

The up arrow adjusts the TEMPO faster, the down arrow adjusts the 
TEMPO slower.  Press the SPACE BAR or ENTER to start the metronome.
Press SPACE BAR or ENTER again to stop it.


                        [ SCALE - F4 ]

The right and left arrows change the key for the scale.  The up 
and down arrows change the type of scale from IONIAN, DORIAN, 
PHRYGIAN, LYDIAN, MIXO-LYDIAN, AEORIAN, and LOCRIAN.  The SPACE
BAR or ENTER will start the tones that will go through that
scale.  Press SPACE BAR or ENTER again to stop it.


                        [ QUIT - F9 ]

Well, this terminates the program.

This program can be found at:
ftp.ring.aist.go.jp:/pub/common/dos/machine/hp/
http://www.vector.co.jp/common/dos/machine/hp/

